bind: remove bind.keys

First, the file is out-of-date.

Second, and more importantly, bind9 includes a compiled-in version which is
up-to-date (see https://www.isc.org/bind-keys/).

Signed-off-by: David Härdeman <[email protected]>

diff --git a/net/bind/Makefile b/net/bind/Makefile
index 17f54386d0331e27263f03b2cc90092cd227754a..a936c5f2538b991d52588ec12cbc934198f36fb0 100644 (file)
--- a/net/bind/Makefile
+++ b/net/bind/Makefile
@@ -224,7 +224,6 @@ define Package/bind-server/install
        $(INSTALL_DIR) $(1)/etc/bind
        $(CP) \
                ./files/bind/db.root \
-               ./files/bind/bind.keys \
                $(1)/etc/bind/
        $(CP) ./files/bind/named.conf.example $(1)/etc/bind/named.conf
        $(INSTALL_DIR) $(1)/etc/init.d

diff --git a/net/bind/files/bind/bind.keys b/net/bind/files/bind/bind.keys
deleted file mode 100644 (file)
index 931ebf9..0000000
--- a/net/bind/files/bind/bind.keys
+++ /dev/null
@@ -1,69 +0,0 @@
-# The bind.keys file is used to override the built-in DNSSEC trust anchors
-# which are included as part of BIND 9.  As of the current release, the only
-# trust anchors it contains are those for the DNS root zone ("."), and for
-# the ISC DNSSEC Lookaside Validation zone ("dlv.isc.org").  Trust anchors
-# for any other zones MUST be configured elsewhere; if they are configured
-# here, they will not be recognized or used by named.
-#
-# The built-in trust anchors are provided for convenience of configuration.
-# They are not activated within named.conf unless specifically switched on.
-# To use the built-in root key, set "dnssec-validation auto;" in
-# named.conf options.  To use the built-in DLV key, set
-# "dnssec-lookaside auto;".  Without these options being set,
-# the keys in this file are ignored.
-#
-# This file is NOT expected to be user-configured.
-#
-# These keys are current as of Feburary 2017.  If any key fails to
-# initialize correctly, it may have expired.  In that event you should
-# replace this file with a current version.  The latest version of
-# bind.keys can always be obtained from ISC at https://www.isc.org/bind-keys.
-
-trust-anchors {
-        # ISC DLV: See https://www.isc.org/solutions/dlv for details.
-        #
-        # NOTE: The ISC DLV zone is being phased out as of February 2017;
-        # the key will remain in place but the zone will be otherwise empty.
-        # Configuring "dnssec-lookaside auto;" to activate this key is
-        # harmless, but is no longer useful and is not recommended.
-        dlv.isc.org. initial-key 257 3 5 "BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2
-                brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+
-                1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5
-                ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk
-                Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM
-                QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt
-                TDN0YUuWrBNh";
-
-        # ROOT KEYS: See https://data.iana.org/root-anchors/root-anchors.xml
-        # for current trust anchor information.
-        #
-        # These keys are activated by setting "dnssec-validation auto;"
-        # in named.conf.
-        #
-        # This key (19036) is to be phased out starting in 2017. It will
-        # remain in the root zone for some time after its successor key
-        # has been added. It will remain this file until it is removed from
-        # the root zone.
-        . initial-key 257 3 8 "AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjF
-                FVQUTf6v58fLjwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoX
-                bfDaUeVPQuYEhg37NZWAJQ9VnMVDxP/VHL496M/QZxkjf5/Efucp2gaD
-                X6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEheX7ICJBBtuA6G3LQpz
-                W5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ57relS
-                Qageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulq
-                QxA+Uk1ihz0=";
-
-        # This key (20326) is to be published in the root zone in 2017.
-        # Servers which were already using the old key (19036) should
-        # roll seamlessly to this new one via RFC 5011 rollover. Servers
-        # being set up for the first time can use the contents of this
-        # file as initializing keys; thereafter, the keys in the
-        # managed key database will be trusted and maintained
-        # automatically.
-        . initial-key 257 3 8 "AwEAAaz/tAm8yTn4Mfeh5eyI96WSVexTBAvkMgJzkKTOiW1vkIbzxeF3
-                +/4RgWOq7HrxRixHlFlExOLAJr5emLvN7SWXgnLh4+B5xQlNVz8Og8kv
-                ArMtNROxVQuCaSnIDdD5LKyWbRd2n9WGe2R8PzgCmr3EgVLrjyBxWezF
-                0jLHwVN8efS3rCj/EWgvIWgb9tarpVUDK/b58Da+sqqls3eNbuv7pr+e
-                oZG+SrDK6nWeL3c6H5Apxz7LjVc1uTIdsIXxuOLYA4/ilBmSVIzuDWfd
-                RUfhHdY6+cn8HFRm+2hM8AnXGXws9555KrUB5qihylGa8subX2Nn6UwN
-                R1AkUTV74bU=";
-};

diff --git a/net/bind/files/named.init b/net/bind/files/named.init
index 12df71efe9e2dba00789716a3c888fbcf0ace564..d26b18ace42c494b91b2370ce4d5e3d05539b3de 100644 (file)
--- a/net/bind/files/named.init
+++ b/net/bind/files/named.init
@@ -79,7 +79,6 @@ start_service() {
     procd_open_instance
     procd_set_param command /usr/sbin/named -u bind -f $args -c $config_file
     procd_set_param file $config_file \
-                        $config_dir/bind.keys \
                         $named_options_file \
                         $conf_local_file \
                         $config_dir/db.*